Penetration test of my Wifi

How to compile Reaver under Ubuntu 12.04 (and aircrack-ng)

This is a quick how-to compile and install Reaver under Ubuntu 12.04

Steps:

1.    download source
2.    install required libraries and tools
3.    download and build aircrack-ng
4.    compile and install
5.    run

Download Source

First you need to download the latest source from http://code.google.com/p/reaver-wps/

    wget http://reaver-wps.googlecode.com/files/reaver-1.4.tar.gz

Extract the tarball

    tar -xzvf reaver-1.4.tar.gz

Install Required Libraries and Tools

Before you can build Reaver you need pcaplib and later on aircrack-ng (iw) to run Reaver

    sudo apt-get install libpcap-dev sqlite3 libsqlite3-dev libpcap0.8-dev

Compile and Install

Build Reaver

    cd reaver-1.4
    cd src
    ./configure
    make

Install Reaver

    sudo make install

Download aircrack-ng source and build it

Since Ubuntu 12.04 aircrack-ng is not longer in the repository but you can still download it from source and compile it. It’s only one little tweak that need to be done since it will not build without the following errors.

    johan@ubuntu-lab:~/aircrack-ng-1.1$ make
    make -C src all
    make[1]: Entering directory `/home/johan/aircrack-ng-1.1/src’
    make -C osdep
    make[2]: Entering directory `/home/johan/aircrack-ng-1.1/src/osdep’
    Building for Linux
    make[3]: Entering directory `/home/johan/aircrack-ng-1.1/src/osdep’
    gcc -g -W -Wall -Werror -O3 -D_FILE_OFFSET_BITS=64 -D_REVISION=0  -fPIC -I..    -c -o osdep.o osdep.c
    gcc -g -W -Wall -Werror -O3 -D_FILE_OFFSET_BITS=64 -D_REVISION=0  -fPIC -I..    -c -o network.o network.c
    gcc -g -W -Wall -Werror -O3 -D_FILE_OFFSET_BITS=64 -D_REVISION=0  -fPIC -I..    -c -o linux.o linux.c
    linux.c: In function ‘is_ndiswrapper’:
    linux.c:165:17: error: variable ‘unused’ set but not used [-Werror=unused-but-set-variable]
    linux.c: In function ‘linux_set_rate’:
    linux.c:334:22: error: variable ‘unused’ set but not used [-Werror=unused-but-set-variable]
    linux.c: In function ‘linux_set_channel’:
    linux.c:807:22: error: variable ‘unused’ set but not used [-Werror=unused-but-set-variable]
    linux.c: In function ‘linux_set_freq’:
    linux.c:896:22: error: variable ‘unused’ set but not used [-Werror=unused-but-set-variable]
    linux.c: In function ‘set_monitor’:
    linux.c:1022:22: error: variable ‘unused’ set but not used [-Werror=unused-but-set-variable]
    linux.c: In function ‘do_linux_open’:
    linux.c:1366:12: error: variable ‘unused_str’ set but not used [-Werror=unused-but-set-variable]
    linux.c:1352:15: error: variable ‘unused’ set but not used [-Werror=unused-but-set-variable]
    linux.c: In function ‘get_battery_state’:
    linux.c:1982:35: error: variable ‘current’ set but not used [-Werror=unused-but-set-variable]
    cc1: all warnings being treated as errors
    make[3]: *** [linux.o] Error 1
    make[3]: Leaving directory `/home/johan/aircrack-ng-1.1/src/osdep’
    make[2]: *** [all] Error 2
    make[2]: Leaving directory `/home/johan/aircrack-ng-1.1/src/osdep’
    make[1]: *** [osd] Error 2
    make[1]: Leaving directory `/home/johan/aircrack-ng-1.1/src’
    make: *** [all] Error 2

This is how to build aircrack-ng under Ubuntu 12.04

    sudo apt-get install build-essential
    sudo apt-get install libssl-dev
    wget http://download.aircrack-ng.org/aircrack-ng-1.1.tar.gz
    tar -zxvf aircrack-ng-1.1.tar.gz
    cd aircrack-ng-1.1

Edit common.mak with vi as example

    vi common.mak

Find the following row

    CFLAGS          ?= -g -W -Wall -Werror -O3

Remove “-Werror” so that it looks like this

    CFLAGS          ?= -g -W -Wall -O3

Save the file, build and install

    make
    sudo make install

Run

Reaver is now installed and ready to use. You will first need to put the wifi adapter info monitor mode before you can start and the most easiest way is to use airmon-ng (part of aircrack-ng) that you just installed.

First put your adapter info monitor mode, in my case it’s wlan0

    sudo airmon-ng start wlan0

Run Reaver

    sudo reaver -i mon0 -b 00:00:00:00:00:00

Replace MAC 00:00:00:00:00:00 with the actual AP:s MAC address to crack

Xiaomi Wireless Bluetooth Gamepad Controller driver issue on Windows 10

Another offtopic...
I got recently Xiaomi gamepad from china. Specs were cool, the issue was that by default buttons were assigned incorrectly. I spent some time looking for solution to this and the only thing that worked for me was found here.

With that small app all buttons are assigned correctly and vibration works.

DNN: can't find /DesktopModules/DDRMenu/Menu.ascx

Little offtopic...
I suddenly got Unexpected error while opening my local dev website dotNetNuke. The log in Portals\_default\Logs mentioned that /DesktopModules/DDRMenu/Menu.ascx is not found although it existed on file system.

Apparently this was caused by adding custom developed module. One guy found the solution and described this situation on this blog post.

So, the solution is to delete virtual folder desktopmodules in IIS. Then the original folder DesktopModules from file system will appear in this place. Next restart application pool and that's it!